“Ensuring Effective Engineering and Technological Education in Nigeria: Role of Statistics”, Proceedings, African Regional Conference on Engineering Education and Sub-Regional Workshop on New Engineering Curriculum, University of Lagos, September, 2002, pp. 139-144.
Environmental Friendly Use of Natural Gas: Alternative Source of Fuel for Nigeria, NSChE Proc. Vol. 2, pp. 31 –38, 1999.
“Feasibility of Sea and Coconut Shells as Substitute to Barium Carbonate (BaCO3 in Small-Scale Foundry and Heat Treatment Shop in Nigeria” ISIJ International, Vol. 35, 1995, No. 22, pages 203 – 209.
“Impact of Tropical Environment on Lubricant Manufacturing.” Proceedings 7th African US International Conference on Manufacturing Technology Network of African Engineers and Scientists, pp. 433 – 439, 2004.
“Innovative Techniques in Hydrophobic Particulate Separation in the Food and Beverage Industries”, Presented at the CIGR Inter-Section Symposium in Nigeria on Rural Technology for Agricultural Growth in Developing Countries, NCAM, September 5 – 10, 1988.
“Kinetics of Aurocyanide Loading with an Anion Exchange Resin”, Reinhardt Shulmann International Symposium on Innovative Technology and Reactor Design in Extraction Metallurgy, Editor Gaskell, D. R., Nov. 9 – 12, 1986, pages 295 – 310.
Kinetics of Selected Materials in Surface Hardening of Spare Parts, NSE Technical Transactions, Vol. 36, No. 1 , March 2001, pp 26 – 39.
“Local Raw Materials for Nigerian Industries – Where Do We Begin?” Nigerian Journal for Technological Development, Vol. 1, No. 2, 1989.
“On-Line Analysis of Phosphorus in Agro-Chemical and Mineral Processing Plants by Radiation Techniques.” Presented at the 12th Annual Conference of NSAE, National Centre for Agricultural Mechanization, NCAM, Ilorin, September 5 – 7 1988.
“Production of a Portable System for Purification of Drinking Water.” African Journal of Science & Tech., Vol. 1, pp. 1-6, 2000.
“Steps Necessary to Achieve Indigenous Technology – The Only Assured Basis for Sound Industrial Development” Nigerian Journal for Technological Development, Vol. 1, No. 1, Pages 1 – 6, January 1988.
“Tertiary Amine Extraction of Molybdenum from Acid Liquor Containing Nickel, Chromium, Cobalt and Iron.” NSChE Proc. Vol. 30, pp. 250 – 262, Nov. 2000.
“Texture, Composition – Sensitive Structure and Mechanical Properties of Al-Cu and Al-Zn Alloy System”, The Nigerian Engineer, Vol. 25, No. 1, January – March 1990, pages 23-30.
“Comparative Analysis of the Rheology of Strait and Blended Oil Lubricants,” Journal of Engineering and Applied Science, Vol. 2, pp. 83 – 88, August , 2006.
“The Use of Selected Biomaterials as Energiser in Surface Hardening of Mild Steel”, Transactions of the Nigerian Society of Engineers, Nigeria. Vol. 35-14, pp. 1-12, 2000.
“Characterization and Processing of Coal Fired Reverbertory Flue Dust” (Grants G5105012 and G51150542, University of Arizona). BuMines OFR 86-83, 56 pages, NTIS PB 83 – 197707.
“Deep-Drawing Performance and Structure – Property Relations of Nigerian Mild Steel” NSE Technical Transactions, Vol. 29, No. 1, January – March 1994, pages 44-51.
“Production of an Alumino-Silicate Refractory Brick Similar in Characteristics to an Imported Refractory Brick using Linear Programming.” Proc. MNS 2003, pp. 24-27.
“The Dynamics of Vocational and Technical Education in a Democratic Nigeria”, Keynote Address at the 4th Annual National Conference, School of Vocational and Technical Education, College of Education, Katsina-Ala, 21st – 25th May, 2001.
“Production of Alumino – Silicate Refractory Brick similar in Characteristics to an imported Refractory brick using Linear Programming.” Proceedings MNS 2003, pp 24 – 27.
“The Role of Foundries in Agricultural Mechanization in Nigeria,” Journal of Sustainable Tropical Agricultural Research, April, 2004.
“ Evaluation of Tribometric Characteristics of Selected Natural Oils,” Nigerian Journal Mechanical Engineering, University of Ado – Ekiti, Vol. 3.1 pp 1 -12, 2005.
“Evaluation of Chemo- Physical Properties of Selected Natural Oils Relevant to Lubrication,” Nigerian Journal of Engineering , Research and Development, Vol. 5 No. 2, pp. 1 – 9, April – June , 2006.